EXPI-Door: Series 700
Lite Kits 9x30 24x30
The Series 700
™ is comprised of the highest quacomponents in conjunction with a proprietary anchoring
system. Our standard components and features are the
competition’s upgrades. Compare the following:
18 gauge galvanized (A60), polyurethane, “R11”, insulated
core, interlocking seam. Doors meet commercial Steel Door
Institute (SDI) standards.
Welded frame. 16 gauge galvanized (A60), 5 3/4" standard
profile, interlocking corner connection (then welded).
meet commercial Steel Door Institute (SDI) standards.
Schlage Grade 2, AL53PD-626-SAT. Meets ANSI A156.2
series 4000, grade 1 requirements. Three-year warranty. Thru
bolted for added strength. Free wheeling vandal resistant
Proprietary offset subjamb/jamb anchor system — tested
to 1,000,000 cycles. 16 gauge galvanized (A40 minimum)
subjamb. Polyethylene block anchors stiffen jambs and allow
for offset design. Self trimming, no jamb trim required.
All doors and frame have a baked-on beige primer coat
Steel latch guard with chrome finish. Prevents
tampering with the latch on lever locks.
Von Duprin/Falcon Exit Devices
Various heavy duty grade 1 rim exit devices from
Von Duprin (Series 22 and 99) and Monarch (18 Series).
Various finishes and trim options. Three-year warranties.
Schlage Mortise Lever Lock
Schlage heavy duty grade 1 mortise lever lockset with
escutcheon plate. 3/4" latch throw and 1" deadbolt
throw. Five-year warranty.
Schlage Grade 1 Lever Lock
Schlage D53PD grade 1 entrance lock. Vandal
resistant free wheeling levers. Independent heavy duty
spring cages for lever support. Thru bolted for positive
interlock to door. Tested to 3,000,000 cycles.
LCN Auto Closers
Grade 1 surface applied closers. Backcheck, sweep and
latch speed adjustment valves. LCN 1261 (moderate duty);
LCN 1461 (moderate to heavy-duty) and LCN 4041 (extra